Mini Split Repair in Delray Beach, FL | Local Service

Vibration or rattling usually indicates an unbalanced blower wheel. This happens when dust and dirt build up unevenly on the cylindrical fan blades inside the unit. A professional deep cleaning will restore balance and quiet the operation.

If the compressor is running but the fan isn't, the fan motor or its capacitor has likely burned out. This is a severe issue because without the fan, the compressor will overheat and permanently seize. Turn the system off at the breaker immediately.

This is one of the most common mini split issues. It almost always indicates a clogged condensate drain line or a failed internal condensate pump. Dust and biological growth can easily block the gravity drain, causing the drain pan to overflow. Turn the unit off immediately to prevent drywall damage and call us to clear the line.

E-series error codes (like E1, E4, E7) indicate specific electrical or sensor failures. For example, E1 often means a communication failure between units. Write down the exact code and call a repair technician, as these issues require a multimeter to diagnose properly.

Absolutely. Annual maintenance is critical for mini split systems. A technician will deep clean the blower wheel, chemically wash the outdoor condenser coils, clear the condensate drain line, and check all electrical flare connections to prevent future breakdowns.

We use three main methods: electronic 'sniffer' wands that detect refrigerant gas, ultrasonic detectors that listen for the high-frequency hiss of a leak, and specialized fluorescent dyes or bubbling soap solutions applied directly to the copper flare joints.

If new batteries don't fix the issue, the infrared receiver board inside the indoor wall unit may have failed, or the remote itself is broken. We carry universal diagnostic remotes to test the indoor head. We can also upgrade your system to include Wi-Fi smart controllers so you can use your smartphone instead of a standard remote.