Mini Split Repair in Florida | Local Techs

If the indoor unit is running but not cooling, the problem usually lies with the outdoor compressor or the refrigerant charge. You could have a micro-leak at a flare connection causing low refrigerant, or the outdoor inverter board may have locked out the compressor due to a power surge. Professional diagnostics are required.

The 'dirty sock syndrome' is caused by bacterial growth on the indoor evaporator coil and inside the drain pan. Because mini splits cool the air and remove humidity, the indoor coil remains wet. If dust bypasses the filter, bacteria thrive in that dark, damp environment. We perform deep chemical cleanings to permanently eliminate the odor.

If new batteries don't fix the issue, the infrared receiver board inside the indoor wall unit may have failed, or the remote itself is broken. We carry universal diagnostic remotes to test the indoor head. We can also upgrade your system to include Wi-Fi smart controllers so you can use your smartphone instead of a standard remote.

The insulation prevents the cold refrigerant gas from absorbing heat before it reaches the outdoor compressor. If birds, sun damage, or weather tear the insulation, your system loses massive efficiency and the exposed pipes will sweat or freeze. We can quickly replace degraded insulation.

E-series error codes (like E1, E4, E7) indicate specific electrical or sensor failures. For example, E1 often means a communication failure between units. Write down the exact code and call a repair technician, as these issues require a multimeter to diagnose properly.

This is one of the most common mini split issues. It almost always indicates a clogged condensate drain line or a failed internal condensate pump. Dust and biological growth can easily block the gravity drain, causing the drain pan to overflow. Turn the unit off immediately to prevent drywall damage and call us to clear the line.

Standard smart thermostats like Nest don't work natively with mini splits because mini split systems use variable speeds, not simple on/off relays. However, we can install specialized adapters (like Cielo Breez or Kumo Cloud) that allow full smartphone control and smart home integration.